Salt analyser, meter

The DiCromat measures a full range of salt levels, with automatic temperature compensation, from 0.1% to over 26% by weight without dilution. The unit can read up to 100% salt with a variable dilution factor. Results can be displayed as follows:

 Percent Salt (A)
 Degrees Salometer (S)
 Conductivity (K)
 Molar Concentration (M)
 Concentration (Cs)

Key Benefits
 Provides for storage in memory of twenty-four (24) sets of calibration and operational parameters.
 Fast, accurate, reliable, and easy to use.
 Eliminates the need for slow, costly titration analysis.

Dip-In Probe for the DiCromat II or IIA Salt Analyzer
The dip-in non-contact probe can be immersed directly into the sample preparation beaker to make a measurement. It is encased in epoxy, which eliminates any direct contact of the sensors to the fluid. The probe cable and 18-pin male connector attach dirrectly to the 18-pin female connector on the back of the DiCromat II.

The Flow-through probe and base-mounted stack allow for stationary sample testing. The flow-through pipe uses 2 titanium circular electrodes located inside the pipe. It can be connected to the instrument in the same manner as the dip-in probe.