WACO Enamel Rater II

The WACO Enamel Rater II  displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.

The instrument applies a constant voltage across the can body and an electrode immersed in an electrolyte-filled can, and measures the resulting current.

Test voltage is set at 6.3 VDC but is adjustable from 4 to 9 VDC.

Operating range is 0 to 500 milliamperes with accurate resolution within 0.1ma.

Remote sensing power supply ensures accuracy by measuring and regulating test voltage at the can being tested.

The instrument operates in industry standard 4 second mode, continuously, or can be programmed to measure any desired time.

In 4-second mode, the display shows the reading only at 4 seconds. In continuous mode the reading is displayed beside elapsed time with the 4-second reading automatically stored in memory for recall.

A simple and foolproof calibration self-test verifies correct, accurate operation.

Location of exposed metal can be determined by reversing voltage which causes bubbles of gas to form on exposed metal for easy visual identification.

Electrolyte level and can contact sensors ensure that testing begins only when can is properly filled with electrolyte solution and good electrical contact with the can has been established.

The sturdy enclosure includes a sealed-membrane keypad for protection against moisture and corrosion in the factory environment.

An RS232 serial interface permits use with remote computers, printers or data collectors.